Câble d'extraction flexible électrique MCPJB d'isolation d'EPR de prix bon marché
Informations de base
Modèle: MCPJB / MCPJR
Description du produit
\ n \ n Type |
Name |
Application |
MCPJB-0.66/1.14 |
Shearer screening monitoring braided reinforced rubber flexible cable. |
Rated voltage of 0.66 / 1.14kV and lower shearer and similar equipment power connection. Cable can be used directly towed. |
MCPJB-1.9/3.3 |
Shearer screening monitoring braided reinforced rubber flexible cable. |
Power connections for shearer and similar equipment rated at 1.9 / 3.3kV and below. Cable can be used directly towed. |
MCPJR-0.66/1.14 |
Shearer shield monitoring around the package reinforced rubber sheathed flexible cable. |
Rated voltage of 0.66 / 1.14kV and lower shearer and similar equipment power connection. However, the cable must be used within the protection link. |
MCPJR-1.9/3.3 |
Shearer shield monitoring around the package reinforced rubber sheathed flexible cable. |
Rated voltage 1.9 / 3.3kV and lower shearer and similar equipment power connections. However, the cable must be used within the protection link. |
\ n \ n 1- Conducteur de fil d'alimentation; Commande de conducteur à 2 fils; 3-Isolation; Bouclier 4-semiconducteur; \ n Gaine 5-intérieure; 6- Surveiller le conducteur de fil; 7- = pour renforcer la couche autour de l'emballage, \ n ≠ pour la couche de renfort tissé (doubler aussi que la couche de base); 8- Gaine extérieure \ n \ n Description \ n 1. La température de fonctionnement maximale admissible est de 90 ℃. \ N 2. Le rayon de courbure min. Du câble MCPJB est de 15 fois le diamètre du câble. Min. Le rayon de courbure du câble MCPJR est de 6 fois le diamètre du câble. 3. Pendant le transport et le stockage, le câble doit être enroulé selon la direction de roulis indiquée sur le tambour de câble, et doit être protégé contre l'humidité. pliage, autres dommages mécaniques, haute température et exposition au soleil. \ n 4. Pendant la pose, les tambours de câble doivent être installés sur l'arbre, et l'entraînement au sol et la forte pression ne sont pas autorisés. \ n 
\ n Tension nominale 0.66 / 1.14kV Paramètres de taille de câble: \ n |
Number of cores × nominal section (mm 2) |
Insulation nominal thickness (mm) |
Sheath nominal thickness (mm) |
Cable diameter (mm) |
|||||
Power core |
Ground core |
Control core |
Polit core |
Power core |
Inner jacket |
Outer sheath |
MCPJR -0.66/1.14 |
MCPJB -0.66/1.14 |
3×35 |
16 |
3×1.5 |
3×1.5 |
1.8 |
1.8 |
3.0 |
40.5~46.0 |
43.5~49.0 |
3×50 |
25 |
3×1.5 |
3×1.5 |
1.8 |
2.0 |
3.5 |
46.5~52.5 |
49.5~55.7 |
3×70 |
35 |
3×1.5 |
3×1.5 |
1.8 |
2.0 |
3.5 |
51.0~57.5 |
54.0~61.0 |
3×95 |
50 |
3×1.5 |
3×1.5 |
2.0 |
2.4 |
4.0 |
57.5~64.5 |
60.5~68.0 |
Note: The nominal thickness of the control core insulation is 0.7mm, the thickness of the inner sheath is not for evaluation. | ||||||||
|
Number of cores × nominal section (mm 2) |
Insulation nominal thickness (mm) |
Sheath nominal thickness (mm) |
Cable diameter (mm) |
|||||
Power core |
Ground core |
Control core |
Polit core |
Power core |
Inner jacket |
Outer sheath |
MCPJR -1.9/3.3 |
MCPJB -1.9/3.3 |
3×35 |
16 |
3×1.5 |
3×1.5 |
2.8 |
1.8 |
3.0 |
46.5~52.0 |
49.5~55.0 |
3×50 |
25 |
3×1.5 |
3×1.5 |
2.8 |
2.0 |
3.5 |
51.5~57.5 |
54.5~61.0 |
3×70 |
35 |
3×1.5 |
3×1.5 |
2.8 |
2.0 |
3.5 |
56.0~62.5 |
59.0~66.0 |
3×95 |
50 |
3×1.5 |
3×1.5 |
2.8 |
2.4 |
4.0 |
62.0~68.5 |
64.5~72.0 |
Note: The nominal thickness of the control core insulation is 0.7mm, the thickness of the inner sheath is not for evaluation. | ||||||||
\ n 
\ n 
\ n Groupes de Produits : Câble minier
